The Locking Band is used to secure two parts of the flue together. A Locking Band is required at every joint.
Wall support are to be used for lateral support only and should be use a minimum of every 3 metres. Only recommended ...
Premium wall brackets are to be used for lateral support only and should be use a minimum of every 3 metres. Only re...
Wall support are to be used for lateral support only and should be use a minimum of every 3 metres. Only recommended ...
Wall support are to be used for lateral support only and should be use a minimum of every 3 metres. Only recommended ...
Premium wall brackets are to be used for lateral support only and should be use a minimum of every 3 metres. Only re...
Wall support are to be used for lateral support only and should be use a minimum of every 3 metres. Only recommended ...
Wall support are to be used for lateral support only and should be use a minimum of every 3 meters. Only recommended ...
The Retrofit base support is adjustable from 120mm to 375mm from the wall, it can be used in conjunction with 90°...
The Retrofit base support is adjustable from 0mm to 120mm from the wall, it can be used in conjunction with 90° o...
The Structural Locking Band replaces the standard locking band where an unsupported length of up to 2.9 metres is req...
Adjustable Base Supports are used internally or externally to provide vertical support to the chimney. This support h...
Adjustable Base Supports are used internally or externally to provide vertical support to the chimney. This support h...
Console Plates can be used as a load bearing support in conjunction with third party fixings.
Transitional plate that converts MI-FLEX flue liner to TWPro, the component is designed to be fixed onto the top of a...
Transitional plate that converts Flexible flue liner to TWPro, the component is designed to be fixed onto the top of ...
The Roof Support will rotate on 2 screws so that the flue can be installed vertically through the roof. The Roof Supp...
Joist supports are used to support the chimney as it is passing through floor joists. The joist support is used in co...
This component is used to secure unsupported chimney sections above 1.5m of the roof level, an extra 1.5m can be achi...
The Stove-Care Guy Wire Kit is the ideal solution to support a high or unsteady chimney. All parts made from rustproof g...
A Roof Brace Kit can be used whenever there is a need to stabilise the chimney above the roof level. The roof brace k...
The Heavy duty roof Support will rotate on 2 screws so that the flue can be installed vertically through the roof. Th...