The Locking Band is used to secure two parts of the flue together. A Locking Band is required at every joint.
The Structural Locking Band replaces the standard locking band where an unsupported length of up to 2.9 meters is requir...
Adjustable Base Supports are used internally or externally to provide vertical support to the chimney. This support h...
Wall support are to be used for lateral support only and should be use a minimum of every 3 metres. Only recommended ...
Wall support are to be used for lateral support only and should be use a minimum of every 3 metres. Only recommended ...
Wall support are to be used for lateral support only and should be use a minimum of every 3 metres. Only recommended ...
Wall support are to be used for lateral support only and should be use a minimum of every 3 metres. Only recommended ...
The Roof Support will rotate on 2 screws so that the flue can be installed vertically through the roof. The Roof Supp...
Joist supports are used to support the chimney as it is passing through floor joists. The joist support is used in co...
This component is used to secure unsupported chimney sections above 1.5m of the roof level, an extra 1.5m can be achi...
Used to ensure water tightness in the passage through the roof. It also protects the flashing from extreme weather co...